NZ MANUFACTURED QUALITY & PERFORMANCE

 

  • ROBUST CONSTRUCTION
  • SIMPLE TO OPERATE
  • ENERGY EFFICIENT TECHNOLOGY

 

Transfer station compactor for small communities, provincial towns and cities, used to compact solid waste into solid waste containers for transport to landfill.

Compactor-350-3
Download Brochure
  • Packet Plate Face – 1500mm x 750mm = 1.13m2
  • Piston Displacement per stroke – 4.34 m3/stroke
  • Effective Displacement – 3.39 m3/stroke
  • Volume per Hour at Low Pressure – 305m3/hour minimum
  • Cycle Time – 40 Seconds low pressure
  • Compaction ratio – 4 to 1 on most refuse
  • Ram Force – Adjustable to a maximum of 46,100kg @ 3600psi
  • Cylinder Stroke – 3.86m
  • Cylinder Bore Diameter – 6” – 152mm
  • Cylinder Shaft Diameter – 4” – 102mm
  • Chamber Length – 3000mm
  • Ram Penetration – 800mm
  • 30 KW Electric Motor – 1440 rpm
  • 460 Litre Oil Reservoir – BP HLPZ 46
  • Proportional Control Valve
  • Horse Power & Load Sense
  • Controlled Piston Pump
  • Hydraulic Pressure
    Max – 248 Bar (3600psi)
    Auto Cycle – 206 Bar (3000psi)
  • Programmable Logic Controlled
  • Proximity Switches – IP65 Rated
  • Push Buttons – IP65 Rated
  • Enclosures – IP65 Rated
  • Star Delta Starter
  • Power Factor Correction
  • Hour meter
  • Cycle counter

415 Volt 3 Phase with earth and one neutral. Warning – Check with your local electricity supplier to see if a soft start is required on electric motors.