• Piston face plate – 770mm x 400mm = 0.308m²
• Piston displacement per stroke – 0.42 m³ / stroke.
• Effective displacement per stroke – 0.28 m³ / stroke.
• Cycle time on auto – 20 seconds.
• Theoretical volume per hour – 50m³ / hour.
• Main cylinder bore diameter – 3″ – 76.2mm.
• Main cylinder shaft diameter – 2″ – 50.8mm.
• Main cylinder stroke – 1360mm.
• Main cylinder applied force – 8,800kg @ 2755 psi (190 bar).
• Chamber length – 900mm.
• Chamber width – 770mm.
• Cylinder penetration into container – 330mm.

• 11 KW Electric Motor – 1440 rpm
• 75 Litre Oil Reservoir – Grade 46 Hydraulic Oil
• Electric Controlled Directional Hydraulic Valves
• Hydraulic Gear Pump – 30Litres Per Minute
• Maximum Pressure – 200 Bar (2900psi)
• Auto cycle pressure switch setting – 190 bar (2755 psi)

• Programmable Logic Controlled
• Proximity Switches – IP65 Rated
• Push Buttons – IP65 Rated
• Enclosures – IP65 Rated
• Soft Starter
• Hour meter – Optional
• Cycle counter – Optional

415 Volt 3 Phase with earth and one neutral.
Warning – Check with your local electricity supplier to see if a soft start is required on electric motors.