NZ MANUFACTURED QUALITY & PERFORMANCE

 

  • ROBUST CONSTRUCTION
  • SIMPLE TO OPERATE
  • ENERGY EFFICIENT TECHNOLOGY

 

Static Recycling Baler – This is a closed end baler producing bales 750mm x 750mm x1250mm used for baling recyclable commodities plastic bottles; soft drink and milk, beverage and steel cans, size reduced paper and cardboard.

STATIC RECYCLING BALER 80
STATIC RECYCLING BALER 80
STATIC RECYCLING BALER 80
Download Brochure
  • PLC controller
    – Auto functions.
  • Piston face plate
    – 750 mmx 750mm = 0.563m2
  • Main cylinder full stroke
    – 3.0 metres.
  • Cylinder bore diameter
    – 8” – 203mm.
  • Cylinder shaft diameter
    – 5” – 127mm.
  • Cycle time full stroke
    – 46 sec.
  • Cycle time – 2 metre average working stroke
    – 33 sec.
  • Chamber length
    – Nominal bale length 1200mm.
  • Chamber Opening
    – 1070mm L x 750mm W.
  • Ram force 
    – 80,000kg @ 3500psi.
  • Bale ejection from compression chamber 
    – 50mm.
  • Tare Weight – hopper not included 
    – 7675 kg.

BALE SIZES

  • Width 750mm
  • Height 750mm
  • Length 1250mm

 

BALE WEIGHTS

  • HDPE 340kg
  • PET 300kg
  • Mixed 350kg
  • 30 KW Electric Motor – 1440 rpm
  • 585 Litre Oil Reservoir – BP HLPZ 46
  • Proportional Control Valve
  • Horse Power & Load Sense
  • Controlled Piston Pump
  • Hydraulic Pressure – Max. 248 Bar (3600psi)
  • Auto Cycle – 240 Bar (3500psi)
  • Programmable Logic Controlled
  • Operators Touch Screen Controlled
  • Proximity Switches – IP65 Rated
  • Push Buttons – IP65 Rated
  • Enclosures – IP65 Rated
  • Soft Starter
  • Hour meter
  • Cycle counter

415 Volt 3 Phase with earth and one neutral.
Warning – Check with your local electricity supplier to see if a soft start is required on electric motors.