SCARLETT STATIC COMPACTOR 800-3

NZ MANUFACTURED QUALITY & PERFORMANCE

 

  • ROBUST CONSTRUCTION
  • SIMPLE TO OPERATE
  • ENERGY EFFICIENT TECHNOLOGY

 

The speed and efficiency of the Scarlett 800-3 produces a quicker container filling cycle.

Transfer station compactor for larger cities with high volume of waste used to compact solid waste into solid waste containers for transport to landfill.

COMPACTOR 800-3
COMPACTOR 800-3
COMPACTOR 800-3
Download Brochure
  • Piston Face – 2000mm x 1210mm = 4.42m²
  • Piston Displacement per stroke – 10.16 m³/stroke
  • Effective Displacement –  7.26 m³/stroke
  • Volume per Hour at Low Pressure – 871m³/hour minimum
  • Cycle Time – 30 Seconds (low pressure)
  • Compaction ratio – 4 to 1 on most refuse
  • Ram Force – Adjustable to a maximum of 62,500kg @ 3600psi (248bar)
  • Cylinder Stroke – 4.25metres
  • Cylinder Bore Diameter – 7” – 178mm
  • Cylinder Shaft Diameter – 5” – 127mm
  • Chamber Length – 3000mm
  • Chamber Width – 2000mm
  • Ram Penetration – 1000mm
  • 45 KW Electric Motor – 1475 rpm
  • 1280 Litre Oil Reservoir
  • Proportional Control Valve
  • Twin Horse Power & Load Sense, Controlled Piston Pumps
  • Hydraulic Pressure
    -Max – 248 Bar (3600psi)
    -Auto Cycle – Variable to suit customer
  • Programmable Logic Controlled
  • Touch Screen Enabled
  • Proximity Switches – IP65 Rated
  • Push Buttons – IP65 Rated
  • Enclosures – IP65 Rated
  • Soft Starter
  • Hour meter
  • Cycle counter

415 Volt 3 Phase with earth and one neutral. Warning – Check with your local electricity supplier to see if a soft start is required on electric motors.