• Piston face plate – 790mm x 740mm = .585m2
• Bale length adjustable – Up to 2.2 metres.
• Pre-press chamber capacity – 3.0 m3
• Hydraulically operated pre-press doors – Operates automatically in auto cycle.
• Main cylinder full stroke – 2.6 metres.
• Main cylinder bore diameter – 8” – 203mm.
• Main cylinder shaft diameter – 4” – 102mm.
• Pre-press cylinder bore diameter – 5” – 127mm.
• Pre-press cylinder shaft diameter – 3” – 76.2mm.
• Water cooled hydraulic system – Thermostatically controlled.
• Cycle time – includes pre-press – 85 sec.
• Chamber width – 790mm.
• Ram force Initial squeeze – 68,000kg @ 3000psi
• Ram force final squeeze – 82,000kg @ 3800psi.
• Bale ejection from compression chamber – Continuous – depends on bale length.
• Tare Weight – including pre-press – 14,000 kg.
• Piston face plate – 790mm x 740mm = .585m2

• 45 KW Electric Motor – 1440 rpm
• 500 Litre Oil Reservoir – BP HLPZ 46
• Proportional Controlled Oil Flow –  Custom designed control block
• Horse Power & Load Sense
• Controlled Piston Pump
• Operating Hydraulic Pressure – 248 to 262 Bar (3600 to 3800 psi)
• Maximum Compensator Pressure – 276 (4000psi)
• Squeeze Hydraulic gear pump
  – High pressure fixed displacement.
  – Capacity 15 litres per min.
  – Relief setting – max pressure 290 bar (4200 psi)

• Programmable Logic Controlled
• Proximity Switches – IP65 Rated
• Push Buttons – IP65 Rated
• Enclosures – IP65 Rated
• Soft Starter
• Hour meter
• Cycle counter

415 Volt 3 Phase with earth and one neutral.
Warning – Check with your local electricity supplier to see if a soft start is required on electric motors.